METROLOGIC INSTRUMENTS, INC. SP5500 OptimusS Series User’s Guide
9Installation Basic Operation In order for the Optimus to operate properly, an application program must be loaded onto the PDT. It is possible for
10Installation 3. Follow steps a and b a. For the RS232 cable plug the 9 pin serial connector into a serial port on the host device. Plug the oppo
11Installation Data Upload 1. To transfer the data collected select the Utilities option. 2. Select the Transfer Files option on the next menu an
12Installation The System Module The system module on the Optimus is another useful tool included with the Optimus. It provides information about th
13Installation Settings SETTING DESCRIPTION DEFAULT Clock Set date and time for the system. N/A Backlight ON Period Set the duration for the key
14Installation Memory The menu option provides the user with ability to gather information on the amount of memory available on the Optimus, as wel
15Installation Application The Application module runs on top of the System module. The OptimusS Series Portable Data Terminals are preloaded with th
16Troubleshooting SYMPTOM DESCRIPTION Make sure the battery is inserted and charged. Charge the battery and check the charging status. If no chargi
17Specifications OPTIMUSS SERIES OPERATIONAL Light Source: Visible Laser Diode (VLD) @ 650 nm Normal Depth of Field: 20 mm - 202 mm(.75"-
18Specifications OPTIMUSS SERIES MECHANICAL Width (Unit): 55 mm (2.2") Depth (Unit): 28 mm (1.1") Height (Unit): 137 mm (5.4")
Copyright © 2006 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, trans
19Contact Information and Office Locations Corporate Headquarters European, Middle East and Asian Headquarters - Singapore Metrologic Instrument
20Contact Information and Office Locations South America and Central America European, Middle East and African Headquarters Asian Headquarters - Si
21Safety Notices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rul
ii Table of Contents Introduction Product Overview...
4Introduction Product Overview The SP5500 OptimusS Portable Data Terminals are robust and versatile scanning devices designed to provide exceptiona
5General Features and Characteristics Figure 1. Scanner Features ITEM NO. DESCRIPTION 1 Red Output Window (Laser Aperture) 2 Safety and Produc
6General Features and Characteristics Multifunctional Keypad Figure 5.Keypad Features ITEM NO. KEY NAME DESCRIPTION 1 POWER Power On/Off. To p
7General Features and Characteristics The LCD Screen The LCD screen of the OptimusS Portable Data Terminal displays program settings, operational p
8Installation Getting Started The OptimusS Portable Data Terminal (PDT) requires minimal effort to begin functional operation for data collection in
Comments to this Manuals