Metrologic MS9520 Voyager User Manual download pdf (Page 7)

INTRODUCTION

Your new scanner has been configured at the factory with default settings.

Since many host systems have unique formats and protocol requirements,

Metrologic provides a wide range of configurable features that may be selected

using this bar code based configuration tool. Once the configuration is

completed, the scanner stores the settings in nonvolatile memory (NOVRAM).

NOVRAM saves the settings when the power is turned off.

Note: Every bar code with an “*” (asterisk) is a default setting. Bar codes with a

“~” (tilde) require the Multi-Code configuration method.

BAR CODE CONFIGURATION METHODS

The MetroSelect class of scanners can be bar code configured in two ways:

Single-Code Method and Multi-Code Method.

Please note that the MS6220 Pulsar

can only be configured

using the Multi-Code Method.

To properly configure an MS9540 scanner, all programming

codes must be scanned using the CodeGate

option.

Single-Code Method:

Most features can be enabled or disabled using the Single-Code Method.

1. Power up the scanner.

2. Scan the bar code for the desired feature.

3. Observe a multi-toned, “save setting” beep that indicates the configuration

has been saved to NOVRAM.

1 2 3 4 5 6 7 8 9 10 11 12 ... 107 108

No comments

Metrologic MS9520 Voyager User Manual Page 7