Metrologic MLPN 2159 User's Guide download pdf (Page 9)

Figure 2

INSTALLING THE SCANNER TO THE HOST SYSTEM

IBM 46xx and OCIA (MS9524-11/9 and MS9544-11/9)

1. Turn off the host system.

2. Plug the male 10-pin RJ45 end of

the MVC cable into the 10-pin

socket on the scanner. You will

hear a ‘click’ when the connection is

made.

3. Connect the other end of the MVC

cable to the host device.

4. Turn on the host system.

Plugging the scanner into a port on the host system does not guarantee

that scanned information will be communicated properly to the host

system. Please refer to the MetroSelect Single-Line Configuration Guide

or MetroSet2’s help files for instructions on changing the scanner’s

factory default configuration. The scanner and host system must use the

same communication protocols.

Caution:

To maintain compliance with applicable standards, all circuits connected to the scanner must

meet the requirements for SELV (Safety Extra Low Voltage) according to EN/IEC 60950-1.

To maintain compliance with standard CSA-C22.2 No. 60950-1/UL 60950-1 and norm EN/IEC

60950-1, the power source should meet applicable performance requirements for a limited

power source.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

No comments

Metrologic MLPN 2159 User's Guide Page 9