Metrologic IS3480-00 User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 114
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
ScanVue5
®
Mini Kiosk
User Manual
M37574–01T
Industrial Electronic Engineers, Inc.
23-June-2008 Rev T Page 9
Wiring the Ethernet Model
Once the ScanVue5
®
unit is mounted in place there are 2 cables (1 cable only if 802.3af
IEEE PoE option is selected) that must be connected before it can be operated. For
aesthetic reasons we suggest the AC and network outlets are mounted close to (or in)
the ceiling or close to the floor. The two cables may also be routed inside the wall or
column and plug into the AC and network connections in the ceiling. This is the
recommended method and provides the cleanest installation.
1. Plug the RJ45 cable Ethernet cable connected to the hub or switch on your LAN into
the RJ45 connector in the rear of the ScanVue5
®
unit (Figure 6).
2. Connect the 8–pin DIN extension cord and the DIN connector coming from the
ScanVue5
®
unit. Line up the arrows on the two connectors and the pins will be
aligned for insertion. On some models, the 8–pin DIN connector is mounted on a PC
board that is accessible from the back of the unit underneath the mounting bracket
(Figure 6). The RJ45 Ethernet connector is also mounted on this PC board
3. Plug the other end of the DIN extension cord into the DIN connector on the power
supply.
4. Plug the power supply into a grounded electrical outlet—the ScanVue5
®
unit will start
its boot–up sequence.
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 113 114

Comments to this Manuals

No comments